Why bobbin thread shows on top

Note-Viking Roses have automatic tension adjustment so you don't have the option of adjusting this like you do on other machines. I've had my Brother Innovis D for about 6 months now. I have had no problems sewing, quilting or embroidering on it until two days ago. I'm wondering if any owners out there have used any embroidery bobbin thread other than the Brother brand successfully.

In the middle of stitching out a design, I ran out of the bobbin thread that came with the machine, so I wound a bobbin of Sulky Lightweight Polyester bobbin thread. From the very first stitch of that bobbin, the thread was coming up to the top. No one near me sells the new Brother bobbin thread wt as opposed to their previous wt , so I also tried two other wt bobbin threads, with similar results. I also significantly reduced the upper tension in increments, using all three new bobbins, and while improving the situation, it did not solve it completely.

BTW, the tension is fine with utility and decorative stitch sewing. Any other similar experiences with the Innovis D?

Although I am on here for this same problem. I will add that there is a little slot on the bobbin where lint can get caught and if you get a business card or laminated card of some sort and pull the lip up and clean out the area, it is amazing.

I had that problem for ages and now I am back with the same issue. I just thought I would give yet another solution to this very frustrating problem! Good luck ladies! Sometimes when I'm embroidering and the design is "off" I will just use a matching thread in the bobbin same as the top thread and the problem is solved. It all has to do with the digitizing of the design, the thread used, the hooping and the tension.

I can only remember a handful of times that I ever had to mess with the tension. Indem Sie weiterhin auf der Website surfen bzw. Mehr erfahren. Ultimate Lighting Sale. Bathroom Vanity Sale. Bestselling Chandeliers and Pendants. Sign In. Join as a Pro. Houzz TV. Houzz Research. Shop Featured Holiday Categories. Home Decor. Holiday Decor. Christmas Trees. Holiday Lighting. Gift Cards.

Bobbin Thread Rising into Embroideries. Email Save Comment Featured Answer. Needless to say I got the "I hate it when you are right" phrase when it worked like magic. Like 2 Save. Sort by: Oldest. Longer stitches tend to be fluffier and are more likely to loop some machines are worse at controlling looping than others. Short stitches tend to be pulled more tightly into the fabric and are also more likely to pull the bobbin to the top. First, determine if the issue is fairly consistent or just a random here and there thing.

Does it happen with certain stitch types or certain threads? The top thread may have caught on something. Common places for this are:. Look for these types of issues and try rethreading the upper thread.

Another solution is to extend the thread path to allow the thread to relax and unkink before it gets to the first thread guide. Most embroidery threads are cross-wound and these are designed for the thread to feed off the top of the spool. I prefer to use some kind of thread holder that allows for a longer thread path. Some machines have an optional platform you can attach.

Or, you may need to get some additional device. Some that I use and appear to be discontinued at this time are the Echidna multi-spool thread stand and the Hemingworth Control-A-Twist thread stand both shown here. If the problem is more consistent, then you may need to adjust some tension settings or possibly just to a little housekeeping.

Before you adjust any tensions, attend to routine maintenance. When was the last time you cleaned out your bobbin case and bobbin area? A good habit to get into is to clean that area out each time you change the bobbin. Some fabrics and thread types contribute to fuzz more than others and you will definitely need to clean more after those. Even the tiniest bit of fuzz in the bobbin tensioners can open it up enough to result in the bobbin thread flowing too freely.

Do not use canned air as you could blow crud deeper into your machine. A good investment is a set of small attachments for vacuuming snug spaces. Sliding a business card through the tension discs on the bobbin case works well. Avoid using a pin or needle that could possibly scratch the bobbin case and contribute to thread damage. Next, make sure you are using the recommend bobbin type and weight for your machine.

Some machines work well with pre-wound bobbins, others not so much. If you are using prewounds, make sure they are the right size. A size L and class 15 bobbins are the same diameter but different heights and are therefore not interchangeable. It just means you may need to adjust your bobbin tension for proper tensions.

It will just lose tension over time. Although bobbin cases are designed for long use, they are still considered disposable. Ordinarily, most machines are in automatic adjustment mode, and anytime you notice the bobbin thread coming on top, the first thing is to check the setting of the machine, and change it to embroidery mode. The weight of the thread is another factor to consider when your bobbin thread starts showing on the top.

There is different tension strength in correlation with the weight of the thread. A thicker thread will apply more tension, while a thinner thread will apply less pressure. In the case when you are using a thicker thread, you may experience increased tension that will cause more bobbin thread to appear on top. But on the other hand, a thinner thread will apply less strain, and less amount of bobbin thread appears on top.

Thus, when next you experience such situations, check out the thickness of the thread and try to adjust accordingly. The length of the stitches can also affect the tension of the thread. And with the improper range of the stitches, the bobbin thread may rise to the top. When the length of the stitches is long, the thread can loop adequately, and we will not expect the bobbin to be loose at the top. While if the length of the stitches is not long, the bobbin thread may not overlap properly, and thus the bobbin thread may appear at the top.

Some of the causes of bobbin thread showing at the top may be random or regular occurrences. As discussed above, they are other reasons that may lead to the occasional loss of tension on the thread, and they include:. Other factors that may lead to consistent problems of bobbin showing on top include:. There are some regular things you have to do to reduce the effect of these problems. Since we have seen the cause of the problem, we can now focus on getting suitable solutions, and they include:.

We have seen that dirt can be one of the causes of bobbin showing and top. The needle holes and other openings may be blocked with dirt which may impede the tension of the thread. To reduce the bobbin appearing on top effect, it is better to run regular maintenance, by leaning the machine and allowing for the smooth passage of the thread without affecting the flow of the thread.

Another suitable solution to this problem is to change damaged parts of the machine. To achieve this, you have to check all the parts of the machine regularly. Replace the damaged parts, especially those places that the thread will have to pass through like the needle. We have seen how the wrong bobbin type may cause it to appear on top. So you can check the manual of the machine to determine the suitable bobbin type. Another way is to search online using the proper model to find a solution online.

Now, if you are sure that you have covered all grounds, check all the necessary parts, take the right precautions, and you still experience this problem, try adjusting the tension thread.

It would be best if you did this anytime you clean your machine or change the machine parts, as the settings may have readjusted automatically.